We should explain. You see, when walking on a typical deck — especially barefooted — we walk apprehensively to avoid splinters around deck screws that poke holes in our dogs. Ouch! But we've found a clever fastening system that restores free-wheeling pep to our step and gives the deck a clean, custom-built look.
We recently tried the new Kreg Deck Jig Concealed Fastening System ($99). Kreg's method: Toescrew the deck boards. Its operation is akin to Kreg's successful pocket-hole system. An angled drill guide precisely positions and pilots a stepped drill bit into the deck board edge. You then fasten the board with Kreg Deck Screws.
The kit includes 100 screws (enough for a 5 x 5 ft. deck), so you'll need more. At $49 for a box of 700 (enough for a 10 x 20-ft. deck), the fasteners are pricey, but the total cost is still comparable to or better than other concealed-fastener systems.
video of this deck-fastening system.
the new Kreg Deck Jig Concealed Fastening System.
To a friend
A friend to HANDY TOOLBOX
The Club
supported by:
Bench Marks
Guide Book and DVD. Here's an animated, instructive video about how the Kreg Deck Jig works. It shows how simple (three-steps) the system is to use.
Photo Gallery. More photos of the Kreg Deck Jig in action.
sponsored
sponsored
PARTNER LISTING Choose the Right Glue. Glues, glues, glues—enough with the glues, already! You go to the hardware store to buy glue, and the minute you hit the glue aisle, you're besieged with choices and stuck reading glue labels (in tiny type) for the next hour. Gorilla Glue understands that simplification is in order, and it has come to the rescue with this handy glue guide full of tips on selecting the right glue. Check it out.
